...
Users are assigned cloud-based workstations to perform research and analysis. This section
provides a description of how to launch and use these workstations.
Launch Workstations
Users can see the assigned workstations by clicking on WORKSTATIONS from the top
menu. By default, all the workstations are in an stopped state.Click on Start to start the workstation.
The workstation should become available within five minutes; you may not see any change immediately. A message will appear when the workstation has been successfully started.
Now click Launch for the workstation. Note: the Launch button does not start your workstation. You must start it before you can log in.
This will provide a user access to their workstation within the browser. The workstation may take a few minutes to initialize. When complete, a login screen will appear.
...
You will be prompted to
...
enter
...
Installed Software
...
the following
...
:
Python 3.9
VSCodium
Cyberduck
7-zip
Notepad++
Git
Git Extensions
Meld
Google Chrome
JRE (Java)
LibreOffice
Putty
R
RStudio Desktop
DBeaver
Anaconda3
KeePass
Connecting to the Data Warehouse
The following sections illustrate how the user can connect to the data stores available to the
SDC.
Connecting to Waze Data in Redshift Using SQL Workbench
Launch SQL Workbench by finding it on the Start menu.
There should be a Redshift (Waze) connection already setup. Just edit the username/password and you should be able to connect. If you are not able to connect, please open a Service Desk ticket so that we can assist you.
Connecting to Waze Data in Redshift Using Python
Here’s a few helpful links on Python
NOTE: When you are granted access to Waze data, the SDC support team creates a new
Redshift user for you, assigns it with a Redshift password, and emails you with information on
the Redshift host you will connect to. This email message provides the redshiftHost,
userName, and userPassword values shown below. Your Redshift credentials are only used
for connecting to Redshift and NOT for accessing the portal, which uses your separate SDC
credentials.
Important: The default version of Python installed on the SDC Windows Workstations is
v3.8. There are two required Python modules that must be installed prior to attempting to
connect to Redshift with Python using the example code below. We recommend using a virtual environment, you can install these modules into the system interpreter. To install these modules into the system interpreter, open a Windows Command Prompt, and enter the following two commands:
Code Block |
---|
C:\Users\username> pip install psycopg2
C:\Users\username> pip install numpy |
The above "pip install …" command(s) only need to be run ONCE on the SDC Windows
Workstation. Once the Python modules are installed, they remain available, even across reboots
of the workstation.
To test Python connectivity to Redshift, open the IDLE python editor and execute the following:
Code Block |
---|
from __future__ import print_function
import psycopg2
import numpy
dbName = 'dot_sdc_redshift_db'
redshiftHost = '[host address]'
redshiftPort = 5439
userName = '[username]'
userPassword = '[password]'
# query = 'select * from dw_waze.alert limit 10;'
query = "select * from dw_waze.alert where
alert_type='ACCIDENT' and city = 'Severance, CO'"
conn = psycopg2.connect(
dbname=dbName,
host=redshiftHost,
port=redshiftPort,
user=userName,
password=userPassword)
cursor = conn.cursor()
cursor.execute(query)
result = cursor.fetchall()
result = numpy.array(result)
# print(result)
for r in result:
print (r[1], r[8], r[18], r[19], r[22], sep='\t') |
For further information and examples, refer to the internal SDC GitLab collaboration site.
Connecting to the Hadoop Hive Metastore
Launch SQL Workbench by finding it on the Start menu.
There should already be a Hive (CVP) connection already setup. Just edit the username/password and you should be able to connect. If you are not able to connect, please open a Service Desk ticket so that we can assist you.
Update Data Formatting Settings in SQL Workbench
Once the connection has been established, navigate to Tools | Options | Data formatting and update the Decimal digits value to 0.
...
Connecting to the SDC Hadoop Data Warehouse Using Python
Here’s a few helpful links on Python
Important: The default version of Python installed on the SDC Windows Workstations is
v3.8. There are two required Python modules that must be installed prior to attempting to
connect to Hadoop/Hive with Python using the example code below. We recommend using a virtual environment, you can install these modules into the system interpreter. To install these modules into the system interpreter, open a Windows Command Prompt, and enter the following two commands:
Code Block |
---|
C:\Users\username> pip install impyla
C:\Users\username> pip install numpy |
The above "pip install …" command(s)s only need to be run ONCE on the SDC Windows
Workstation. Once the Python modules are installed, they remain available, even across reboots
of the workstation.
To test Python connectivity to the data warehouse, open the IDLE python editor and execute:
Code Block |
---|
from __future__ import print_function
from impala.dbapi import connect
import numpy
conn = connect(
host='[host address]',
port=10000,
auth_mechanism='PLAIN',
user='[your_username]' ,password='[your_password]')
cursor = conn.cursor()
cursor.execute('SHOW TABLES')
result = cursor.fetchall()
result = numpy.array(result)
# print(result)
for r in result:
print (r)
|
...
SDC Username - Enter your SDC credentials (provided in your welcome email)
SDC Password - Enter your SDC credentials (provided in your welcome email)
Login.gov Email - Enter your Login.gov email id
Login.gov Password - Enter your Login.gov password
Login.gov One-time Authentication code - Download, install and setup with Login.gov an authentication app to your device and enter the one time authentication code and hit “ enter.”
Some popular options include:
Android options: Google Authenticator, Authy, LastPass, 1Password.
iOS options: Google Authenticator, Authy, LastPass, 1Password.
Windows apps: 1Password, OTP Manager.
Mac apps: 1Password, OTP Manager.
Chrome extensions: Authenticator.
...
Installed Software
By default, users will have the following installed on their workstations:
Python 3.9
VSCodium
Cyberduck
7-zip
Notepad++
Git
Git Extensions
Meld
Google Chrome
JRE (Java)
LibreOffice
Putty
R
RStudio Desktop
DBeaver
Anaconda3
KeePass
Manage Workstations
After launching their workstations, users can manage resizing CPU/RAM and scheduling uptime for a workstation by clicking on its Manage button as shown below.
...
Selecting each option renders the appropriate tabs in the dialogue window. The icon shown next to each option provides an informational tooltip on their functions.
Resize Workstation
To resize the workstation, select the checkbox for Resize Workstation and then Next to continue.
A message is shown at the bottom of the screen indicating that the workstation will be stopped before applying the resize.
The Resize Workstation tab allows users to select desired CPU/RAM for their
workstation. Current configurations will be grayed out and unavailable. Users can also
explore pricing details using the link provided under “click here.”Select the “Please start my workstation after resizing to the new configuration” checkbox
to automatically start the workstation with the new configuration after saving changes.Select Submit after all details are entered.
A Recommended List of instances will appear. Select the desired instance and then the
Next button.On the Schedule Date tab, users are prompted to enter a date range for how long the
resize should last for the workstation instance. Enter the From and To dates and then
select Submit.
...
8. Users will be returned to the Workstations tab with updated CPU and memory information. They will also receive a success email message from the system confirming the resize expiration date.
Schedule/Extend Uptime
By default, all workstations are shut down at 11 pm EST. If you want to schedule your
workstations to be up for a longer period to accommodate analysis runs, select the
checkbox for Schedule Workstation Uptime and then Next to continue.The Schedule Workstation Uptime tab allows users to enter a date range for how long the
workstation uptime should last to skip shutdown. Enter the From and To dates and then
select Submit.To extend any currently scheduled uptime for the workstation, select the Workstations
tab and then select Manage again for the workstation. A new tooltip is now shown for the
Schedule Workstation Uptime checkbox on mouse hover that indicates previously
scheduled uptime.Repeat steps 1-2. For step 2, the From date will already include the date from the
previously scheduled uptime. Add a new To date later in the calendar and then submit the
update. The previously scheduled uptime goes inactive while the new one becomes
active.After selecting Submit, return to the Workstations tab and then select Manage for the
workstation. The tooltip shown on hover for the Schedule Workstation Uptime checkbox
now displays the extended uptime.
Stop Workstations
Users can see the assigned workstations by clicking on the workstations tab on the top right corner of the page. By default, all the workstations are scheduled to stop every day at 11 PM EST. Users can stop the workstations manually by clicking on the Stop button as shown below. A message will appear when the instance is successfully stopped.
...